Buy now!
Product Info for TRYBE Defense AR-15 Extra Lightweight M-LOK Handguard w/ Cut Away Rail
TRYBE Defense has your 6 with some new gear. You want it. You need it. Equip your AR-15 with flashlights, optics, laser sights and other tactical accessories without worrying about weighing down your rifle when you use the TRYBE Defense AR-15 M-LOK Extra Lightweight Handguard w/ Cut Away Rail. The AR Handguards & Forends from your loyal friends at TRYBE Defense are machined from 6061-T6 aluminum that is incredibly durable and ultra-lightweight, with the 15" rail weighing in at only 0.88lbs. Aircrafts are made from this stuff. The TRYBE Defense AR-15 M-LOK Extra Lightweight Handguard is easy to install on your own, and every order includes a barrel nut and mounting screws so you're not wasting precious range time searching for extra hardware. Reduce your weapon's weight and enhance your build by upgrading to the TRYBE Defense AR-15 M-LOK Extra Lightweight Rifle Handguard.
If you want this same handguard but with a full top rail, do not fret! Check out the TRYBE Defense AR-15 M-LOK Lightweight Handguard with Full Rail and find the length and finish you need.
Got your eye on some new gear, do ya? Don't sleep on all of the amazing firearms accessories and tactical gear that TRYBE has to offer your next build, and to give yourself an edge in the field. TRYBE Defense has all of the AR Parts you need to keep your rifle looking fierce and operating at a high level, including a wide variety of Handguards and Upper Receivers. But don't stop there. Feast your eyes on all the other high-quality parts and accessories the innovators at TRYBE Defense have to offer. From fully assembled Bolt Carrier Groups and ambidextrous Charging Handles and Safety Selectors to high-performance adjustable Drop-In Triggers and ultra-effective Muzzle Devices. And our hyper-accurate, long-lasting Rifle Barrels and durable Grips & Handstops will keep those groupings tight!
And if you're looking for something with a little extra suppression power the brand new TRYBE Defense Cowl Induction Muzzle Brakes will leave you utterly amazed. Just don't forget to wipe the drool off your chin. And you're going to need something to carry all that swag. Finish it off with a TRYBE Tactical 42" Rifle Case to wrap your rifle in soft, cushy protection. If you're toting a load of gear, the spacious TRYBE Tactical Range Bag has all of the right pockets to keep you well supplied and organized.
For other quality gear to carry and protect everything you'd need for a day at the range check out the premium field accessories that your loyal friends at TRYBE Tactical and TRYBE Optics have for you. Start customizing today and get ready to JOIN. THE. TRYBE.
Installation instructions
Handguard installation instructions:
In order to install your new hand guard you will need the following tools:
30mm Wrench
T25 Torx Screw Driver
Threadlocker (optional)
Once you have installed your barrel in your upper, thread on the barrel nut onto the upper receiver and tighten down to 35-65 foot pounds.
After you have installed your gas block and tube assembly slide the hand guard over the barrel nut. You may apply lock-tight to the exterior of the barrel nut across the knurled surface for added grip. (The rail will need force when going over the barrel nut as the knurling is designed to mar the interior surface of the rail adding additional grip.)
Align the rail with your receiver and put the mounting screws in the drilled holes from the left side of the upper receiver and proceed to tighten them down to 50 inch pounds.
WARNING:
California`s Proposition 65
Specifications for TRYBE Defense AR-15 Extra Lightweight M-LOK Handguard w/ Cut Away Rail:
Manufacturer:
TRYBE Defense
Finish:
Hard Anodized
Fabric/Material:
6061-T6 Aircraft Grade Aluminum
Gun Make:
AR Platform
Gun Model:
AR-15
Gun Type:
Rifle
Gun Rail:
M-LOK
Condition:
New
Included Accessories:
Barrel Nut and Mounting Screws
Inner Diameter:
1.365 in
Height:
2.025 in
Country of Origin:
USA
Quantity:
1
Features of TRYBE Defense AR-15 Extra Lightweight M-LOK Handguard w/ Cut Away Rail:
Extra Lightweight
Barrel Nut Torque Wrench Size: 30mm
T15 Mounting Screws Included
M-LOK Positions: L/R/Top/Bottom
QD Sling Sockets:
Included (TRB-HZ-TRYEXLI-HDG12CR-BL, TRB-HZ-TRYEXLI-HDG12CR-FDE, TRB-HZ-TRYEXLI-HDG15CR-BL, TRB-HZ-TRYEXLI-HDG15CR-FDE, TRB-HZ-TRYEXLI-HDG9CR-BL, TRB-HZ-TRYEXLI-HDG9CR-FDE)
Not Included (TRB-HZ-TRYEXLI-HDG7CR-BL, TRB-HZ-TRYEXLI-HDG7CR-FDE)
Passed through rigorous testing from machining through shipping
Machined from 6000 Series Aluminum
Barrel Nut Weight: 107g / 3.77 oz.
Proudly Made in the USA
Package Contents:
TRYBE Defense AR-15 Extra Lightweight M-LOK Handguard w/ Cut Away Rail
Barrel Nut and Mounting Screws
Similar Products to TRYBE Defense AR-15 Extra Lightweight M-LOK Handguard w/ Cut Away Rail
TRYBE Defense AR Parts
TRYBE Defense M-LOK Cut-Rail & Full-Rail Handguards
TRYBE Defense Upper Receivers
TRYBE Defense Bolt Carrier Groups
TRYBE Defense Charging Handles
TRYBE Defense Safety Selectors
TRYBE Defense Drop-In Triggers
TRYBE Defense Muzzle Devices
TRYBE Defense Rifle Barrels
TRYBE Defense Grips & Handstops
TRYBE Defense Cowl Induction Muzzle Brakes
TRYBE Tactical 42" Rifle Case
TRYBE Tactical Range Bag
TRYBE Warranty
TRYBE™ products are made for performance and durability and are covered by a comprehensive warranty depending on the type of product. See full warranty information here